<td id="46k44"><source id="46k44"></source></td>
<td id="46k44"><source id="46k44"></source></td>
  • <td id="46k44"><source id="46k44"></source></td>
    <noscript id="46k44"><tr id="46k44"></tr></noscript>
    <td id="46k44"><source id="46k44"></source></td>
    <td id="46k44"><rt id="46k44"></rt></td>
    在線留言| 聯系我們| 收藏本站 歡迎光臨無錫錫能鍋爐有限公司官方網站!
    當前位置:新聞資訊 >> 公司資訊

    天然氣熱水鍋爐

    發布日期:2019-09-18 13:22:31 訪問次數:726

    小易為你介紹一下防止天然氣熱水鍋爐事故

    天然氣熱水鍋爐配有通風口,防止天然氣熱水鍋爐產生壓力,引發爆炸事故。 同時,它具有低水位保護。 當供水停止時,天然氣熱水鍋爐將自動停止工作,防止天然氣熱水鍋爐干燒。 導致電加熱元件損壞甚至燒壞。 漏電保護器使操作員和設備的安全性更加安全。 即使在天然氣熱水鍋爐運行不當引起的電路短路或漏電的情況下,天然氣熱水鍋爐也會自動切斷電路,及時保護操作人員和控制。 線路的安全性。 天然氣熱水鍋爐在短時間內快速有效地達到設定的工作溫度,即使在水化過程中也沒有溫度波動。
     天然氣熱水鍋爐出廠前已經過嚴格調整。 用戶只需要連接電源和水源。 按下啟動按鈕進入天然氣熱水鍋爐的全自動運行狀態,無需復雜安裝。

     除垢清洗,按比例在清洗槽循環水中加入除垢清洗劑,清洗和除垢熱水鍋爐,根據污垢量確定清洗周期時間和劑量,并確認 所有比例都被清理干凈。 轉到下一個清潔程序。 清洗水并將清洗設備連接到熱水鍋爐后,應用清水清洗10分鐘,檢查系統狀態,是否有泄漏,浮銹被沖走。 剝離防腐蝕清洗劑,按比例向清洗槽循環水中加入表面脫模劑和緩釋劑,循環清洗20分鐘,分離水垢和清洗部件,保留物體表面不結垢,防止腐蝕 在除垢清潔過程中,清潔劑會腐蝕清潔組件。 鈍化涂層處理,在熱水鍋爐清洗系統中加入鈍化涂層劑,鈍化涂層處理,防止管道和部件腐蝕,新生銹。

    英文:

    Xiaoyi introduces to you how to prevent accidents of natural gas hot water boilers


    Natural gas hot water boilers are equipped with vents to prevent natural gas hot water boilers from generating pressure and causing explosion accidents. At the same time, it has low water level protection. When the water supply stops, the natural gas hot water boiler will stop working automatically to prevent the natural gas hot water boiler from drying. Causes the electric heating element to damage or even burn out. Leakage protectors make operators and equipment safer. Even in the case of short circuit or leakage caused by improper operation of the natural gas hot water boiler, the natural gas hot water boiler will automatically cut off the circuit to protect operators and control in time. Line safety. The natural gas hot water boiler achieves the set working temperature quickly and effectively in a short time, even in the hydration process, there is no temperature fluctuation.


    The natural gas hot water boiler has been strictly adjusted before leaving the factory. Users only need to connect power and water. Press the startup button to enter the fully automatic operation state of the natural gas hot water boiler without complicated installation.


    Scale cleaning, scale cleaning agent is added to circulating water of cleaning tank proportionally, cleaning and scaling hot water boiler, cleaning cycle time and dosage are determined according to the amount of dirt, and all proportions are cleaned up. Go to the next cleaning procedure. After cleaning the water and connecting the cleaning equipment to the hot water boiler, clean the system with clean water for 10 minutes, check the system status, whether there is leakage, floating rust is washed away. Peel off the anti-corrosion cleaning agent, add surface demoulding agent and slow-release agent to the circulating water of the cleaning tank proportionally, and clean for 20 minutes. Separate the scale and cleaning parts, keep the surface of the object free from scaling, and prevent corrosion during the cleaning process, the cleaning agent will corrode the cleaning components. Passivation coating treatment, adding passivation coating agent in hot water boiler cleaning system, passivation coating treatment, prevent pipeline and components from corrosion, new rust.

    聯系我們
    服務熱線

    0510-85605893

    傳真號碼0510-85600555

    企業郵箱xngl@xngl.com

    地址無錫惠山經濟開發區堰新東路9號

    彩乐乐网